|
|
Post by david on Mar 1, 2005 11:45:08 GMT 7
hey, i've e route 66 pedal, but i've no idea how im gg to put the velcro strap on so i can stick it on my pedal board, cos there's lyk rubber studs on e pedal..yeah.. so wondering if u guys cld help out
|
|
|
|
Post by Pathein.Raindrop.Moe on Mar 1, 2005 11:52:11 GMT 7
removed the rubber feet? Or stick the whole piece of velcro along the bottom and over the rubber feet? Or if dont want to destroy anything that might make the heart bleed. Dont stick velcro  |
|
|
|
Post by Stunotonyas on Mar 1, 2005 12:55:43 GMT 7
u can try sticking a piece of wood or styrofoam below it n then the velcro so that the feet doesnt touch the ground..
|
|
|
|
Post by Metal Zoner on Mar 1, 2005 14:16:15 GMT 7
you do as 44ofjuly suggests... if you need to clean out the sticky stuff.. use lighter fluid as a solvent. |
|
|
|
Post by Stunotonyas on Mar 2, 2005 10:37:04 GMT 7
Or stick the whole piece of velcro along the bottom and over the rubber feet? that's what my bassist did with his H2O.. Or if dont want to destroy anything that might make the heart bleed. Dont stick velcro n this is what i do.. |
|
|
|
Post by Gearjunkie on Mar 14, 2005 3:49:14 GMT 7
i removed the rubber feet to apply velcro on my H20... easy to do, if you really need them back in the future just use some strong double sided tape i guess... thats what looks like is on the feet anyway. The paint on the VS pedals seem sturdy enough not to rip away with the velcro i use.......
|
|
